Aluminum Profile 78in "P2" Suspension Fixture Capable

Our aluminum profile "P2" is a slim profile with a rounded lens, that can be surface mounted as well as suspended (pendant mounting). Similar to "P," Aluminum Profile "P2" can accommodate any LED strip up to 0.66 Inch (16.7mm) wide, and maximizes the lifetime of your LEDs by acting as a heat sink for your high-output LEDs. The compact and slim design allow for one to professionally suspend the fixture from ceilings without hassle. Aluminum Profile “P2” is conveniently sold in 6.5ft lengths as a completed kit including a pair of end-caps, suspension kit, and one semi-clear or white lens. Order today to professionally illuminate your desired space! View Spec Sheet Here!

Applications

Aluminum profile "P2" is designed for suspended mounted installations. It features an attractive rounded lens, making it perfect for use in a wide variety of lighting applications. It can be suspended or surface mounted depending on your application. Although intended mainly for indoor use, aluminum channels protect LED strips from direct exposure to damaging elements.

Installation

With aluminum profile "P2", one has the option of using a suspension kit to hang the light fixture, or directly screw into your mounting surface for surface mounted applications.

Mounting Method #1 (Use of Suspension Kit)

Install in minutes with our included suspension kit. Simply screw the anchor into your desired surface, install the included aircraft cable and cut to your desired length. Before Installing the closed end-cap onto light fixture, slide cable-grip retaining screws into the rear channel of the aluminum housing. Insert End-Cap, and tighten cable-gripper onto light fixture. Aircraft cable can now be pulled into the cable-grip and adjusted to desired suspension height.

Surface Mounting Method (Direct-Screw)
Drill hole specific to your mounting screw diameter into aluminum housing. Counter-sink the hole so a flat-head screw can sit flush with the housing. Install LED Strip over screw.

Cutting

To cut your aluminum profiles and make your lighting fixtures a custom length, simply snap the lens onto the profile, and place the channel onto a miter saw with the lens facing down. By doing this you can easily cut both the channel and lens to your desired length at the same time. We recommend using a NEW fine tooth blade to cut your aluminum channels for LED strips. The diffuser/lens is fragile and will easily break with an old blade. The easiest way to avoid breaking a lens or diffuser is to lower the saw blade slowly while cutting.

DOTLESS Lighting!

To achieve dot-free evenly diffused lighting in Aluminum Profile "P2" choose from the following DOTLESS LED strips.
12V DOTLESS White LED Strip (Most Popular!)
24V DOTLESS White LED Strip

Best Used with the Following GlowbackLED Products

Due to shipping size restrictions, 94 inches is the MAX size for free shipping. You can select full-size 8ft (96 Inch) under product options before adding them to your cart, you will be charged with a FEDEX OVERSIZE fee at checkout.