Aluminum Profile "S92" Hand Rail Lighting 78"

For abstract recessed lighting solutions in indirectly lighting areas such as hand rails, aluminum profile "S92" is a perfect solution. Aluminum channel "S92" is an even slimmer version of our aluminum extrusion "S9", meant for application in areas with a very limited amount of space. Aluminum channel "S92" can be recessed in almost any surface, and can accommodate any LED strip up to 0.39 Inch (10.0mm) wide, and properly disperse heat from the strip while protecting it from the elements. At just over 1/2 Inch of depth, the compact design allows one to seamlessly recess the channel in almost any surface, while achieving evenly diffused, indirect lighting that can be used in a number of applications. Aluminum extrusion "S92" is conveniently sold in 6.5ft lengths as a completed kit including a pair of end-caps, and a premium polycarbonate, UV-resistant frosted lens. Order today to discretely accent your projects! View Spec Sheet Here!

Applications

Aluminum profile "S92" is a compact aluminum extrusion designed specifically for indirect recessed lighting in areas such as handrails, that allows one to achieve evenly diffused and DOTLESS lighting, while adding a modern decorative finish to your projects. The compact design of this channel makes it easy to recess in most surfaces that have a thickness of more than just 1/2 Inch, making it a perfect solution for illuminating handrails in places such as homes, restaurants, nightclubs, and any other applications one can think of! Although intended mainly for indoor use, aluminum channels protect LED strips from the elements, making them suitable for outdoor applications giving one even more options for lighting solutions.

Installation

With Aluminum profile "S92", one must first create a groove or cavity in the desired mounting surface.
After creating groove, clean the mounting surface of dust and residue to ensure that adhesive sticks properly. Apply all purpose caulking, and hold the fixture into the groove until adhesive dries.

Cutting

To cut your aluminum profiles and make your lighting fixtures a custom length, simply snap the lens onto the profile, and place the channel onto a miter saw with the lens facing down. By doing this you can easily cut both the channel and lens to your desired length at the same time. We recommend using a NEW fine tooth blade to cut your aluminum channels for LED strips. The diffuser/lens is fragile and will easily break with an old blade. The easiest way to avoid breaking a lens or diffuser is to lower the saw blade slowly while cutting.

DOTLESS Lighting!

To achieve dot-free evenly diffused lighting in Aluminum Profile "DT13" choose from the following DOTLESS LED strips.
12V DOTLESS White LED Strip (Most Popular!)
24V DOTLESS White LED Strip

Best Used with the Following GlowbackLED Products

UL-Listed White LED Strips
RGB Color Changing LED Strips
RGBW Color Changing and White LED Strips
Dimmable and Nondimmable Power Supplies
Connectors