Aluminum Profile ''O3'' 8FT Slim Recessed Linear LED Housing

For discrete, recessed lighting in narrow spaces such as in cabinets or closets, our aluminum profile "O3" is a perfect solution. Aluminum channel "O3" can accommodate any LED strip up 0.80 Inch (20.3mm) wide, and properly disperse heat from the strip. The compact design allows one to easily recess this in drywall or surfaces that are 1/2 Inch to 5/8 Inch thick, without having to modify framing and achieving evenly diffused lighting throughout your space while adding modern architectural touch to your design. Aluminum extrusion “O3” is conveniently sold in 8 ft lengths as a completed kit including a pair of endcaps and one premium poly-carbonate, UV-resistant frosted lens. Order today to discretely accent your projects! View Spec Sheet Here!

Applications

Aluminum extrusion "O3" is a slim profile with a depth of 0.39 Inch making it a perfect solution for recessing in-cabinets and shelving as well as any other application in which this type of lighting is desired. Although intended mainly for indoor use, the channels can be waterproofed, as well as used with waterproof LED strips to make them suitable for outdoor applications, providing even more options for your lighting ideas. This is the perfect channel for illuminating and accenting small areas and tight spaces inconspicuously, having a finish flush to the surface you are putting the channel in.

Installation

Install LED Aluminum housing "O3" by first creating a groove or cavity in the desired cabinet, drywall, or shelf.

Mounting Methods

1. Clean mounting surface (groove) of dust and residue.

2. Apply all purpose caulking/adhesive.

3. Install assembled fixture.

1. Screw Aluminum housing into cavity (counter-sink screws so LED strip has flat surface to install onto.

2. Attach LED Strips onto Aluminum housing over counter-sunk screws.

Cutting

To cut your aluminum profiles and make your lighting fixtures a custom length, simply snap the lens onto the profile, and place the channel onto a miter saw with the lens facing down. By doing this you can easily cut both the channel and lens to your desired length at the same time. We recommend using a NEW fine tooth blade to cut your aluminum channels for LED strips. The diffuser/lens is fragile and will easily break with an old blade. The easiest way to avoid breaking a lens or diffuser is to lower the saw blade slowly while cutting.

DOTLESS Lighting!

To achieve dot-free evenly diffused lighting in Aluminum Profile "O3" choose from the following DOTLESS LED strips.
12V DOTLESS White LED Strip (Most Popular!)
24V DOTLESS White LED Strip

Best Used with the Following GlowbackLED Products

Due to shipping size restrictions, 94 inches is the MAX size for free shipping. You can select full-size 8ft (96 Inch) under product options before adding them to your cart, you will be charged with a FEDEX OVERSIZE fee at checkout.