8ft | 4 Inch Trimless Recess Mount Linear Light

Our 8ft LVLBY43T is a high-output 4 Inch wide trim-less ("plaster in" flange) flush mount recessed linear LED light fixture. Available in 1,243 lumens per foot light output levels, our LVLBY43T can be used for general lighting (sole source of light) in homes, offices, retail spaces, and restaurants. The trim-less, smooth and continuous 4 inch wide recessed lighting is an elegant and alluring addition to any modern or classic space. Our 8ft LVLBY43T requires 3 inches of clearance but has an internal power supply allowing one to connect the light fixture directly to the "line voltage" (120-277 or 347VAC). Our LVLBY43T is dimmable all the way down to 1% with 0-10V dimming wires. It is available in 3000K, 4000K, or 5000K color temperatures and can be easily customized to meet your needs. Our 8ft LVLBY43T can be recessed in dry-wall or solid ceilings. View Spec Sheet Here!

Sizes

Our LVLBY43T is available in standard lengths of 2ft, 4ft, 6ft, and 8ft, but can be made to custom sizes upon request. Multiple Fixtures can be connected to create un-interrupted, seamless, continuous runs of light. They can also be configured to make rectangles, squares, octagons, and more! Request a Quote for your custom size or shape linear lighting project.

Light Color

Our 8ft LVLBY43T light fixture comes with a standard color rendering index value (CRI) over 80, CRI>90 is available upon request. It is conveniently available in five standard color temperatures: 2700K, 3000K, 3500K, 4000K, and 5000K. Custom color temperatures are available upon request (MOQ may apply).

Mounting Options

Our 8ft LVLBY43T light fixture can easily be recessed into any drywall or solid ceiling type that allows for a 3 inch tall (~ 2.5 Inch Clearance) recessed light fixture. Our LVLBY43T features an integrated plaster-bead which allows you to "mud up" or "plaster finish" up to the aperture of the light. For the best effect, we recommend either installing on new drywall, or creating a "rebate" or notch in previously finished drywall for the cleanest look. Framing is required on both sides of the opening for the fixture, the fixture is screwed in place through the integrated plaster bead and into the framing. The framing does not need to run full length, but having it span the full length of the fixture or run makes the installation simpler. Refer to our Mounting Instructions for more information.