8ft | 3 Inch "Plaster-In" Recessed Linear Lighting

Our 8ft LVLBY33T is a 3 Inch wide trim-less ("mud over" flange) recess mount linear LED light fixture. It is a high-output light source, delivering either 684 or 1,243 lumens per foot light output levels, our LVLBY33T can be used for general lighting (sole source of light) in hospitality, residential, or commercial recessed linear lighting applications. When finished our 2ft LVLBY33T light fixture only reveals an even, 3 inch wide line of light when plaster has been applied and finished/sanded over the "plaster bead". Our 8ft LVLBY33T requires 3 inches of clearance but has an internal power supply allowing one to connect the light fixture to the "line voltage" (120-277 or 347VAC). It is available in 3000K, 4000K, or 5000K color temperatures and can be easily customized to meet your needs. Our 8ft LVLBY33T can be recessed in dry-wall or solid ceilings. View Spec Sheet Here!

Sizes

Our LVLBY33T is available in standard lengths of 2ft, 4ft, 6ft, and 8ft, but can be made to custom sizes upon request. Multiple Fixtures can be connected to create un-interrupted, seamless, continuous runs of light. They can also be configured to make rectangles, squares, octagons, and more! Request a Quote for your custom size or shape linear lighting project.

Light Color

Our 8ft LVLBY33T light fixture comes with a standard color rendering index value (CRI) over 80, CRI>90 is available upon request. It is conveniently available in five standard color temperatures: 2700K, 3000K, 3500K, 4000K, and 5000K. Custom color temperatures are available upon request (MOQ may apply).

Mounting Options

Our 8ft LVLBY33T light fixture can easily be recessed into any drywall or solid ceiling type that allows for a 3 inch tall (~ 2.5 Inch Clearance) recessed light fixture. Our LVLBY33T features an integrated plaster-bead which allows you to "mud up" or "plaster finish" up to the aperture of the light. For the best effect, we recommend either installing on new drywall, or creating a "rebate" or notch in previously finished drywall for the cleanest look. Framing is required on both sides of the opening for the fixture, the fixture is screwed in place through the integrated plaster bead and into the framing. The framing does not need to run full length, but having it span the full length of the fixture or run makes the installation simpler. Refer to our Mounting Instructions for more information.