2ft-4ft | 1 Inch Decorative Trimless Recess "DT3"

Our 2-4ft LEDBARIIDT3 is a custom made 1 inch wide trim-less ("Plaster-In") recessed LED light for decorative and ambient lighting purposes built to any specified size from 24 up to 48 inches. It only requires 7/16 inch recessed depth making it suitable for installation in 1/2 or 5/8 drywall. Our 2-4ft LEDBARIIDT3 features a plaster-bead allowing one to finish ("mud up") right to the lens of the linear light. When finished, only the aperture of the light is revealed. Because of our 2-4ft LEDBARIIDT3's slim recessed depth it is only capable of delivering 230 lumens/ft making it only suitable for decorative or ambient lighting applications (not suitable as sole source of light in a space), for 1 inch trim-less general lighting see our LVLBYT product line (recessed general lighting requires 1.3 inches of clearance). View Spec Sheet Here!

Sizes

Our 2ft LEDBARIIDT3 is available in standard lengths of 2ft, 4ft, 6ft, and 8ft, but can be made to custom sizes upon request. Multiple Fixtures can be connected to create un-interrupted, seamless, continuous runs of light. They can also be configured to make rectangles, squares, octagons, and more! Request a Quote for your custom size or shape linear lighting project.

Light Color

Our 4ft LEDBARIIDT3 light fixture comes with a standard color rendering index value (CRI) over 80, CRI>90 is available upon request. It is conveniently available in three standard color temperatures: 3000K, 4000K, and 6000K, but can also be ordered in 2200K and 2700K. Custom color temperatures are available upon request (MOQ may apply).

Mounting Options

Our 4ft LEDBARIIDT3 light fixture can easily be recessed into any drywall or solid ceiling type that allows for a 1.3 Inch tall (~ 0.8 Inch Clearance) recessed light fixture. Our LEDBARIIDT3 features an integrated plaster-bead which allows you to "mud up" or "plaster finish" up to the aperture of the light. For the best effect, we recommend either installing on new drywall, or creating a "rebate" or notch in previously finished drywall for the cleanest lool. Framing is required on both sides of the opening for the fixture, the fixture is screwed in place through the intregrated plaster bead and into the framing. The framing does not need to run full lenght, but having it span the full length of the fixture or run makes the installation simpler. Refer to our Mounting Instructions for more information.

Power Supply Options

These Linear LED Fixtures require a remote power supply to operate. In many cases, multiple linear LED fixtures can be connected to a single power supply. We have power supplies available in Standard Dimmable (TRIAC/Phase), 0-10V Dimmable (requires wires for dimming), or non-dimmable (on/off) configurations. We also have power supplies pre-configured with connectors for plug and play installations.

Contact Us for Volume Pricing | Request a Quote