Aluminum Profile "Q" 78in Recessed Application

Aluminum Profile "Q" is a recess mounted aluminum housing for high-output LED strips. It can be recessed into drywall to create flush-mounted lines of lighting. When used with our high-density, DOTLESS LED strips you can create an evenly diffused, dot-free, 7/8 Inch line of recessed lighting. Use the provided spring activated clips to easily recess the housing into your space (NOTE: space required above drywall). Aluminum Profile "Q" can accommodate any high-output LED strip up to 0.72 Inch wide (18.3mm) and properly dissipate the heat for maximum longevity. Aluminum Profile "Q" is sold in 6.5ft lengths (78") as a completed kit including a pair of end-caps, (3) spring activated drywall-clips, and a premium poly-carbonate frosted lens (diffuser). View Spec Sheet Here!

Applications

Aluminum Channel "Q" is a compact, recessable aluminum extrusion that is capable of holding high-output LED strips. It's deeper design allows you to make DOTLESS fixtures with almost any LED strip (minimum LED density 16ft-60/M). It is suitable for residential or commercial lighting applications. Linear recessed lighting adds an elegant modern touch to any space.

Installation

With aluminum profile "Q", one has the option of using spring activated mounting clips, or direct-screw method.

Mounting Methods

1. Drill hole suitable to your mounting screw.

2. Counter-sink hole so LED strip can sit flush over flat-head screw.

3. Screw housing into framing or solid ceiling above drywall. Use appropriate screws. Each 78 Inch run should use (3) screws.

1. Attach provided spring clips to the rear of channel

2. Be sure that the spring clips have space to open when they are released inside of the cavity.

3. Squeeze clips as you insert them allowing the housing to go into the cavity.

4. Spring activated clips will automatically engage and hold onto drywall once inserted. Use a minimum of (3) clips per 78 Inch length.

Cutting

To cut your aluminum profiles and make your lighting fixtures a custom length, simply snap the lens onto the profile, and place the channel onto a miter saw with the lens facing down. By doing this you can easily cut both the channel and lens to your desired length at the same time. We recommend using a NEW fine tooth blade to cut your aluminum channels for LED strips. The diffuser/lens is fragile and will easily break with an old blade. The easiest way to avoid breaking a lens or diffuser is to lower the saw blade slowly while cutting.

DOTLESS Lighting!

To achieve dot-free evenly diffused lighting in Aluminum Profile "Q" choose from the following DOTLESS LED strips.
12V DOTLESS White LED Strip (Most Popular!)
24V DOTLESS White LED Strip

Best Used with the Following GlowbackLED Products

Due to shipping size restrictions, 94 inches is the MAX size for free shipping. You can select full-size 8ft (96 Inch) under product options before adding them to your cart, you will be charged with a FEDEX OVERSIZE fee at checkout.